AT-HDR-EX Articles
- KB01284 - What does a flashing/blinking LINK LED light mean?
- KB01531 - How to update the firmware on an HDR-EX-70-2PS
- KB01532 - How to update the firmware on an AT-HDR-EX-70C-KIT and AT-HDR-EX-100CEA-KIT
- KB01584 - Random video loss when using Integra AVR
- KB01280 - What do the LED lights on the RJ45 port mean?
- KB01285 - What does a flashing power LED light mean?
- KB01578 – Pin-out for IR pass-through using the AT-HDR/UHD-EX-100CEA-KIT
- KB01274 - How to use and interpret the AT-HDR-EX Series HDBaseT Analyzer
- KB01492 - How to verify the RX Firmware of AT-HDR-EX-70C and AT-HDR-EX-100CEA HDR extenders
- KB01442 - Dolby Vision at 4k @ 60hz not passing through HDR-EX-70-2PS, Dolby Vision 4k @ 30hz works fine
- KB01441 - Do the HDR-EX-70-2PS’ support Dolby Vision?
- KB01397 - How to perform a HDBaseT using the HDR-EX-70-2PS HDBaseT Test Software
- KB01286 - What is the maximum resolution these units support?
- KB01282 - Can I use any power supply 5volt with the AT-HDR-EX-70-2PS extender set?
- KB01281 - Is it possible to share a power supply from the HDR-EX-70-2PS with an UHD-EX-70-2PS unit?
- KB01279 - Can I use third party power supplies with the -2PS extenders?
- AT-HDR-EX-70-2PS - Am I able to only power one end of the extenders?
- KB01277 - What is the maximum HDMI cable distance that can be used on the input and output?
- KB01276 - What are the maximum CAT cable distances for video/audio playback?
- KB01275 - Is it possible to power one end of the HDR-EX-70-2PS extender set?
- KB01271 - Do the HDR-EX series of extenders pass CEC?
- KB01270 - Will the AT-HDR-EX-70-2PS extenders support 3D Video?