SKUs: AT-HDR-EX-70C-KIT, AT-HDR-EX-100CEA-KIT
Summary: How to update FW on the HDR-EX-70C and HDR-EX-100CEA—
How to easily update FW on the transmitter and receiver with a Windows computer
Transmitter:
- Download the FW from our website:
- Extract the files in the zip folder
- Set the UTILITY dial to 2
- Disconnect the 48 V DC power supply from the transmitter
- Connect the mini-USB to USB-A cable from the UTILITY port, on the transmitter, to the computer with the FW file
- Reconnect the power supply to the transmitter. A USB Drive folder should be displayed after a few seconds. If the folder is not displayed, navigate to Windows Explorer and select the USB Update folder.
- Delete all files from the USB Driver folder, if any are present
- Drag and drop the .bin FW file to the drive. While the firmware loads to the unit, the green power LED on the front will flash.
- Once the LED is solid green, disconnect the USB cable from the computer.
- Leave the UTILITY Dial on 2.
Receiver:
- Disconnect the Ethernet cable from the HDBaseT IN port on the receiver
- Connect the mini-USB to USB-A cable from the UTILITY port on the receiver to the computer with the FW file
- Reconnect the Ethernet cable to the HDBaseT IN port on the receiver. A USB Drive folder should be displayed after a few seconds. If the folder is not displayed, navigate to Windows Explorer and select the USB Update folder.
- Delete all files from the USB Driver folder, if any are present
- Drag and drop the .bin FW file to the drive. While the firmware loads to the unit, the green power LED on the front will flash.
- Once the LED is solid green, disconnect the USB cable from the computer.
- Set the UTILITY Dial back to 1
The Firmware update on both the TX and RX is complete. To verify the FW version on the TX, use the Analyzer Tool 1.0.04. To confirm the FW version on the RX see Article KB01492
Article ID: KB01532