Atlona Help Center

KB01556 - How to set a Saved/Learned EDID from a Display to an Input on an Omnistream Encoder

SKU: AT-OMNI-111, AT-OMNI-112, AT-OMNI-121, AT-OMNI-122, AT-OMNI-521, AT-OMNI-512

AMS 2.0

Starting on the decoder:

Navigate to the HDMI Output tab.

In the EDID section, highlight and copy the text in this field. This is your RAW EDID data.

Navigate to the encoder to which you'd like to apply this EDID, and follow these steps:

Article ID: KB01556

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us