KB01459 - My AT-ANC-108D is configured in Velocity, but is not controlling my device

SKU: AT-ANC-108D, Velocity, AMS

Subject: My AT-ANC-108D is configured in Velocity, but is not controlling my device

Explanation:

If you've configured your AT-ANC-108D in Velocity but it is not performing the expected controls, please follow these steps to resolve this issue:

1. Take note of the AT-ANC-108D IP settings.
2. Telnet into the AT-ANC-108D.
3. Issue the Mreset command.
4. The unit will revert to the following IP settings:
   
   

   IP Address:	192.168.1.50
   Subnet Mask:	255.255.255.0
   Gateway:	192.168.1.254

5. Reconfigure the AT-ANC-108D network settings as you had prior to issuing the Mreset command.

Now the AT-ANC-108D should function as configured within Velocity.

Article ID: KB01459