SKU: AT-PROHD44M, AT-PROHD48M, AT-PROHD88M, AT-PROHD1616M
Subject: How to change the IP address or web password on an AT-PROHD matrix
Explanation:
Before beginning this process, you will need:
- The AT-PROHD serial program and establish an RS232 connection to the matrix.
- A USB to RS232 cable will be required. Make sure to use Com port 1-10, any number higher will not be recognized by the software.
With an RS232 connection established to the matrix, through the matrix's software, access the "Net Set" tab to change the unit's password and IP address:
Article ID: KB01425