SKU: AT-HD-SC-500
Subject: How to set the Auto Power Off Timer on the AT-HD-SC-500
Explanation:
The “Auto Power Off Timer” feature of the AT-HD-SC-500 is used in conjunction with the “Display Auto Power Off” feature to allow the AT-HD-SC-500 to turn itself off after a specified amount of time if an incoming signal is not detected from a source. Display Auto Power Off will send an on/off command to your TV (after the display/projectors commands are entered into the HD-SC-500’s “RS-232/IP commands section).
The default setting is 15 seconds
Article ID: KB01420