Atlona Help Center

KB01035 - How to set a fallback input on the AT-HDVS-200-TX

The AT-HDVS-200-TX allows you to set a fallback port input using the 200-TX’s web interface. Utilizing this feature will allow the HDVS-200-TX to switch from a chosen input (such as the fallback port) to any newly connected input and once the newly connected device is removed, the Atlona unit will automatically switch back to the selected fallback port (even if no signal is present).

To choose the fallback port:

  • Please access the AT-HDVS-200-TX’s web interface and access the “Video” settings.
  • Under the “Auto Switch” section, select your desired Fallback Port (highlighted in green). The default select is the “previous” input that was connected.
  • Here, you are also able to select a Fallback time (in seconds) that the Atlona system will wait for, before switching from one input to the fallback port. The default setting is 5 seconds.

An example of AT-HDVS-200-TX Web Interface (located under Video settings):


Article ID: KB01035

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us