Atlona Help Center

KB01699 - How to update the firmware on an AT-JUNO-451-HDBT



The AT-JUNO-451-HDBT can only be updated through the webGUI.
New firmware
• IP address of the AT-JUNO-451-HDBT
• Computer on the same network as the AT-JUNO-451-HDBT
• Username and password to access the web GUI. (Default is un: root, pw: Atlona)

1. Connect an Ethernet cable from the computer, containing the firmware, to the same network where the AT-JUNO-451-HDBT is connected.

2. Go to the System page in the web GUI.

3. Click the Choose File button, under the System section.

4. Browse to the location of the firmware file, select it, and click the Open button.

5. Click the Update button.

6. The following dialog will be displayed.

7. Click the OK button to begin the firmware update process. Click the Cancel button to cancel the process.

After the update process has completed, the AT-JUNO-451-HDBT will automatically reboot, and the Login
screen will be displayed.


Article ID: KB01699

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us