Atlona Help Center

KB01131 - Limited functionality when using AT-HDVS-150-TX/AT-HDVS-150-TX-WP with the AT-HDVS-200-RX


Symptoms: You are able to get video/audio playback but cannot control your display/projector or do not have auto-switching capabilities


When pairing the HDVS-150 transmitters with a HDVS-200 receiver there are certain features that no longer function. The AT-HDVS-150 transmitters rely on their receiver (i.e. AT-HDVS-150-RX) to provide display control and enable/disable auto switching. The AT-HDVS-200 series are designed with control built into the transmitter unit with the 200-RX acting as a receiver/scaler. If you are using a 150 series transmitter and a 200 series receiver in tandem, you will be able to get audio and video playback,however you will not have control capabilities nor will you have the auto-switching capabilities.


Use the AT-HDVS-150-RX with 150 transmitters or use the AT-HDVS-200-RX with the 200 transmitters for full functionality of each series.

Article ID: KB01131 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us