KB01315 - How to Quickly get a static IP address for the AT-UHD-HDVS-300-KIT

SKU: AT-HDVS-300-KIT

Description: How to Quickly get a static IP address for the AT-UHD-HDVS-300-KIT

Troubleshooting:

1. Verify the unit is on and not in a standby state.
2. Press and hold the “Input” button for 15 seconds

Note: You will see lights flash- (2) flashes for Static and (4) for DHCP

IP: 192.168.1.254

Subnet Mask: 255.255.0.0

Default Gateway: 192.168.1.1

3. Open Network Sharing Center                                                                                         
4. Click on “Change Adapter Settings”                                                                                 
5. Connect a straight-through CAT cable from a computer LAN port to the AT-UHD-HDVS-300-KIT
6. Click on the LAN connection                                                                               
7. Click “Properties”                                                                                      
8. Double click on IPV4                                                                                         
9. Enter the following IP address and Subnet Mask followed by clicking “ok” (sets computer to this IP address)                                                                                          
10. Enter the Static IP of the AT-UHD-HDVS-300-KIT and press “ENTER”                                   
11. Username: root
12. Password: Atlona

Article ID: KB01315