The AT-HDVS-150 system will pass through 2ch audio from an HDMI source to the HDMI output of the HDVS-150-RX.
You do not have to enable/disable any functions in the RX to perform this function. Simply connect your audio/video source to the TX which will automatically pass the video/audio signal through to the RX.
If you want to utilize the analog audio breakout of the RX, please note this will not downmix audio signals but will only de-embed them. This means that sending a Dolby signal in will not produce a stereo signal out. You must set your source to output 2ch audio (such as 2ch PCM) which will then be de-embedded (stripped out) on the analog L/R output of the RX.
Article ID: KB01027