Atlona Help Center

KB01211 - EDID set up via front panel


Subject: EDID set up via front panel


To Adjust EDID via the front panel:

  1. Press Menu:                                                                                                                                                                                                                       
  2. Press the down arrow until you see “EDID Setting” on the screen:
  3. Press ENTER for “EDID Mode”:                                                                                                              
  4. Select input port # to adjust EDID for (1-7) :                                                                                                                                                                                 
  5. Select if you want to use the “Default”, “Memory” or “Int” EDID. "Default" is what the unit ships with, Memory is the EDID you learn from an output and Int is the internal EDID you can choose from below:
  6. We recommend you start by adjusting INT EDID (unless you want to use a learned EDID)
  7. The screen will now show “Source # Mode: Int”, press enter to cycle through the 18 EDID’s built into the unit:                                                                                               

 Article ID: KB01211

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us