Atlona Help Center

KB01032 - Is it possible to configure the AT-HDVS-150-RX via USB?

The mini USB port on the AT-HDVS-150-RX () is only used for performing firmware updates on the HDVS-150-RX. This port cannot be used for the configuring of RS232 commands. All control programming must be done via the RS232 port.

For assistance in programming an AT-HDVS-150-RX please see this article.

Please note, the AT-HDVS-RX shares its features and configuration process with the AT-HDVS-150-RX. The information above remains true for the AT-HDVS-RX unit as well.

Article ID: KB01032

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us