CLSO-824 Articles
CLSO-824
- KB01555 - How to Configure AT-UHD-CLSO-824 Route Recall for use with the IR Remote
- KB01450 - How to view the firmware of a CLSO-824 on its front panel
- KB01358 - AT-UHD-CLSO-824 Lockups
- KB01338 - How to use the output OFF and ON commands
- KB01326 - Does the AT-UHD-CLSO-824 embed audio from the MIC/LINE in to the HDBT and HDMI outputs?
- KB01313 - CLSO-824 RS-232 zones explained
- KB01303 - AFV and AFOV differences explained
- KB01212 - How to access the web interface of the 824 unit
- KB01211 - EDID set up via front panel
- KB01170 - Passing RS232 commands through the AT-UHD-CLSO-824 to the either an HDVS receiver or HDVS transmitter used on the HDBaseT input (transmitter) or HDBaseT output (receiver)
- KB01161 - Auto switch is enabled on HDVS-150-TX/-WP when used with AT-UHD-CLSO-824 switcher
- KB01150 - Only hearing one audio channel (L or R) on the Analog output of an AT-UHD-CLSO-824
- KB01134 - Video loss occurs intermittently when sending commands from Crestron to the AT-UHD-CLSO-824
- KB01009 - CLSO-824 Analog Audio Output Issues
- KB01010 - CLSO-824 DSP Version 80.80 (Audio Playback Issue)
- KB01011 - How to send RS232 commands through the AT-UHD-CLSO-824