Atlona Help Center

KB01476 - How to Address Black Screen with Blinking Cursor During AMS Boot Sequence

SKU: AT-SW-AMS (2.0+)

Subject: How to Address Black Screen with Blinking Cursor During AMS Boot Sequence

blinking_cursor2.png

Solution: 

1. Click the X to close the Atlona AMS 2.0 window

2. From the pop-up window, navigate to "Power off the machine" and click OK

power_off_the_machine.png

3. Now that the machine is powered off, click the "Settings" icon to check settings

settings-ubuntu_34.png

4. Click the Version drop-down menu and select Ubuntu (64-bit), then click OK

settings-ubuntu_64.png

5. Start AMS again

6. Once AMS loads, you should see the correct login screen (your AMS IP address may vary from the screenshot below)

AMS-correct_login_screen.png

Article ID: KB01476

 

 

 

Was this article helpful?
4 out of 5 found this helpful
Have more questions? Contact Us