Atlona Help Center

KB01378 - How to access web-GUI of the CLSO-601 using a static IP address

SKU: AT-UHD-CLSO-601

Subject: How to access web-GUI of the CLSO-601 using a static IP address

Steps:

The AT-UHD-CLSO-601 comes with DHCP turned on by default. This means the unit will be automatically issued an IP address when connected to a router which supports DHCP. If you don’t have a router that supports DHCP or want to set your own IP address to the CLSO-601, please follow the steps below:

  1. Determine what IP address your computer is on. You can change your computers IP address by following the steps in this article. If the UHD-CLSO-601 does not have any IP address, please see this article.
  2. After finding your computers IP address, enter this into your favorite internet browser and you should see the CLSO-601’s login page:

Login Credentials are: Username = root   PasswordAtlona (case sensitive)

Article ID: KB01378 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us