Atlona Help Center

KB01021 - Is It Possible to Configure the AT-HDVS-RX via USB?

 

SKUs: AT-HDVS-RX

The mini USB port on the AT-HDVS-RX () is only used for performing firmware updates on the HDVS-150-RX. This port cannot be used for the configuring of RS232 commands. All control programming must be done via the RS232 port.

For assistance in programming an AT-HDVS-RX please see this article.

Article ID: KB01021 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us