Atlona Help Center

KB01100 - AT-PRO3 Matrix Compatible Receivers

SKUs: AT-PRO3HD44M, AT-PRO3HD66M

The AT-PRO3HD matrix is an HDBaseT which uses Power over CAT Cable (POCC) technology to send power to its receivers over the CAT line. Below is a list of both the receivers that are directly compatible with the matrix (POCC) and those that can be made to work through additional steps.

Directly compatible:

AT-PRO3HDREC

AT-HDRX-IR

AT-HDRX-RSNET (70m transmission distance max)

AT-HDWP-IR

AT-HDTX (No IR/RS232 capabilities)

Compatible only if used with AT-PS-POE POE injector or by using USB (FW) to supply power at RX:

AT-UHD-EX-70-RX (sold as a kit with AT-UHD-EX-70-TX - this model will only allow for up to 70m of transmission distance)

AT-UHD-EX-70C-RX (note, this model will only allow for up to 70m of transmission distance)

AT-UHD-EX-100CEA-RX (sold as a kit with AT-UHD-EX-100CEA-TX)

AT-CENT-301-CEA Receiver (sold with AT-CENT-301-CEA Transmitter)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

AT-UHD-EX-70-2PS-RX (sold as a kit with AT-UHD-EX-70-2PS – This model does not require AT-PS-POE as it comes with its own power supply - this model will only allow for up to 70m of transmission distance)

Article ID: KB01100 

 

 

 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us