Atlona Help Center

KB01267 - Cannot set the AT-ANC-108D to a static IP via AMS

SKU affected: AT-ANC-108D

Symptom: Cannot set the AT-ANC-108D to a static IP via AMS

Solution: There is currently no way to set a static IP of the ANC-108D using AMS software. Work arounds are:

Using front panel to set to a static IP:

  1. Remove front faceplate
  2. Press and hold the top right button
  3. Press the reset button underneath the USB port
  4. The top right button will blink 3 times to confirm the change was applied

 

 

Using ANC-108D Web-GUI:

  • Use the current IP address followed by “/technical support”

Ex: 192.168.1.85/technicalsupport

  • Use credentials - Username = root   Password = Atlona
  • Go to the System Settings tab
  • Turn off DHCP
  • Enter your desired IP address

You should not be able to use the ANC-108D with your static IP address.

Article ID: KB01267

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us