Atlona Help Center

KB01222 - OmniStream™ Decoder IP, Backup Inputs Assignments Explained

SKU: OMNI-122, OMNI-121

Subject: OmniStream™ Decoder IP, Backup inputs assignment

Steps:

The “HDMI Output” Tab provides options to configure the Decoder output streams, each stream element is assigned to a specific ip_input, single decoders utilize up to 6 inputs and dual Decoder’s utilize up to 12 inputs, use the following table for input assignments:   

To assign/modify the OmniStream™ Decoder HDMI Output Video, Audio and AUX:

  1. Login into AMS
  2. Select the OmniStrean™ Decoder unit you wish to modify                                                    
  3. The OmniStream™ unit options will appear, please select the “HDMI Output” Tab:      
  4. Select the Decoder HDMI Output and select the appropriate “ip_inputx” for each video element, (Video, Audio and AUX) assigns the backup inputs where applicable:                       
  5. Click the “Save” button.

 Article ID: KB01222 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact Us